Modular Drive Systems

AQPR-07A-120120Te Capacity Powered Reel Drive System

arrow
AQPR-07A-120

The AQPR-07A-120 powered reel is a medium sized tower drive system for handling umbilicals, small flexibles, wire ropes and coiled tubing. The unit is fitted with horizontal cylinders to engage the drive hubs into the reel centre with pins slotting into the reel drive holes and vertical hydraulic jacks to raise and lower the drive hubs of reels at full load capacity.

Various adapter plates are available to suit different reel flange arrangements and hole centre diameters. The tower bases are bolted together and spacer beams are available to suit different reel widths. The reel is powered by either an electro hydraulic or diesel engine powerpack and operated from either a remote control console or at the powerpack.

The system is road transportable by a standard 30Te low loader.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY
 

Drive Torque:
  • 40Te.m at 1 rev/min
Maximum Reel (+Product) Weight:
  • 120Te offshore
Standard Reel Capacity:
  • Width 5.00m – 6.00 m
  • Diameter 2.50m - 9.20m
Multi – Reel Lay Mode:
  • The AQPR-07AD-120 is compatible with the AQPRTS02 powered reel track system. The track system comprises two sets of beams. The lower beams are seafastened to the deck of the vessel while the upper beams move along the lower beams using a combination of hydraulic cylinders, rams and clamps. The AQPR-07A-120 tower is bolted to the upper beams of the tracked system 
  • During installation of product the first reel will be lifted out of its cradles using the AQPR-07A-120 jacks and the product installed. On completion of the installation the reel will be lowered back into its cradles using the AQPR-07A-120 jacks before moving the towers to engage the next reel using the tracked system. This procedure would be repeated for a number of reels depending on the available deck length of the vessel 

Notes:

  • Larger reel widths and diameters can be accommodated using spacers and packers to suit client requirements
  • Various drive adapters, spacer beams and storage reels are available with the system or can be readily fabricated to suit the project requirements

Description
AQPR-07A-120 Setup
AQPR-07A-120 Towers
Typical Powerpack
Control Cabin
Spares
Cabin
Length
4.80m
2.30m
2.70m
1.50m
2.00m
Breadth
4.10m
4.10m
1.80m
1.50m
1.90m
Height
4.10m
3.50m*
2.25m
2.20m
2.25m
Weight
23Te
11.5Te**/ tower
4.5Te
1Te
2Te

Notes:

  • The powerpack is supplied with 10m hydraulic supply hoses and a 20m long power cable as standard
  • Longer hoses or cables can be supplied on request