1500Te carousel for the installation, recovery, replacement and storage of flexible products
The AQCS-01-1500 carousel system can take a product load of up to 1,500Te.
The carousel system has a built-in tensioner with a maximum line pull of 5Te to maintain a product tension on the horizontal reel at all times. In addition, it is capable of a maximum speed of approximately 1km per hour.
The tensioner is mounted on a level-wind tower which will ensure proper spooling on and off the carousel.
With a reel diameter of 12m and a variable hub diameter, the Aquatic carousel can handle multiple products.
ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.
Dimensions and weight
|Reel diameter||fixed at 12m|
|Hub diameter||4 - 6m variable in 1m stages|
|Height (false roof removed)||6.16m|
|Height under roof plate||3.5 - 5m variable in 0.5m stages|
|Grillage size||14.5m x 11.9m|
|The heaviest single piece||18Te|
|Heaviest assembly lift||120Te|
|Maximum product load||1,500Te|
|Minimum product diameter||75mm|
|Maximum product diameter||Capacity is controlled by the tensioner setting, which can nominally be set to 400mm, with larger diameters available on request|
|Normal operating speed||600m/hour|
|Tensioner||5Te line pull|