120Te drive system for the installation, recovery and replacement of flexible products

Equipment Description

BENEFITS:
  • various adapter plates
  • cost effective transport options
  • smaller footprint        

This medium sized tower drive system for handling umbilicals and small flexibles.     

The AQPR-07-120 is compatible with the AQPRTS-01 and AQPRTS-02 powered reel track systems and is capable of handling umbilicals, small flexibles, wire rope and coiled tubing.  The unit is fitted with horizontal cylinders to engage the drive hubs into the reel centre with pins slotting into the reel drive holes and vertical hydraulic jacks to raise and lower the drive hubs of reels at full load capacity.

Various adapter plates are available to suit different reel flange arrangements and hole centre diameters. The tower bases are bolted together and spacer beams are available to suit different reel widths. The reel is powered by either an electro hydraulic or diesel engine powerpack and operated from either a remote control console or at the powerpack.

The system is road transportable by a standard 30Te low loader.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY.

ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.

Dimensions and weight

DESCRIPTION
AQPR-07-120 SETUP
AQPR-07-120 TOWERS
TYPICAL POWERPACK
CONTROL CABIN
SPARES CABIN
Length
4.80m
2.30m
2.70m
1.50m
2.00m
Breadth
4.10m
4.10m
1.80m
1.50m
1.90m
Height
4.10m
3.50m
without packers
2.25m
2.20m
2.25m
Weight
23Te
11.5Te/tower
4.5Te
1Te
2Te

Performance

Drive torque:
  • 40Te.m at 1 rev/min
Maximum reel (+ product) weight:
  • 120Te offshore
Standard reel capacity:
  • ø 2.5 - 9.2m
  • Any reels outwith standard size may be able to be accommodated

120Te
Request more information