200Te modular drive system for the installation, recovery and replacement of flexible products

Equipment Description

BENEFITS:
  • multiple product types
  • various adapter plates
  • longer products lengths                    

This powered reel system can handle umbilicals, small flexibles and wire ropes.

The unit is fitted with horizontal cylinders to engage the drive hubs into the reel centre with pins slotting into the reel drive holes and vertical hydraulic jacks to raise and lower the drive hubs of reels at full load capacity.

Various adapter plates are available to suit different reel flange arrangements and hole centre diameters.

The unit can be set to operate in manual, constant tension or render mode.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY.

ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.

Dimensions and weight

DESCRIPTION
AQPR-08E-200 SETUP
AQPR-08E-200 TOWERS
TYPICAL POWERPACK
CONTROL CABIN
SPARES CABIN
Length
4.60m
2.30m
2.70m
1.50m
2.00m
Breadth
4.10m
4.10m
1.80m
1.50m
1.90m
Height
3.80m
3.60m
details without packers and tower to tower cross members
2.25m
2.20m
2.25m
Weight
36Te
18Te/tower
details without packers
 
4.5Te
1Te
2Te

Performance

Drive torque:
  • 80Te.m at 1 rev/min
Maximum reel (+ product) weight:
  • 200Te offshore
Standard reel capacity:
  • ø 2.5 - 9.2m
  • Any reels outwith standard size may be able to be accommodated

AQPR-08_news
Request more information