500Te drive system for the installation, recovery and replacement of flexible products

Equipment Description

BENEFITS:

  • multiple product types
  • longer products lengths
  • cost effective transport options

The powered reel system is capable of driving Aquatic, Coflexip, and NKT reels.    

The unit is fitted with horizontal cylinders to engage the drive hubs into the reel and vertical hydraulic cylinders to raise and lower the drive hubs of reels at full load capacity.

The unit can be set to operate in manual, constant tension or render mode.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY.

ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.

Dimensions and weight

Description Setup (5m reel) Setup (6m reel) Individual towers Typical powerpack Control cabin Spares Cabin
Length 10.97m 11.52m 2.30m 2.60m 1.60m 2.50m
Breadth 4.80m 4.80m 4.80m 1.70m 1.60m 2.00m
Height 7.82m 7.28m 7.82m 2.25m 2.20m 2.20m
Weight 30Te/tower 30Te/tower 30Te 4Te 1Te 4Te

Performance

Drive torque:
  • 150Te.m at 0.5 rev/min
  • 60Te.m at 1 rev/min
Maximum reel (+ product) weight:
  • 500Te offshore
  • For reel diameters above 11.4m, maximum reel and product weight is reduced
Standard reel capacity:
  • Width 5 - 6m
  • ø 6.5 - 12.3m
  • Any reels outwith standard size may be able to be accommodated

500Te
Request more information