60Te winch for the installation, recovery and replacement of flexible products

Equipment Description

BENEFITS:
  • multiple product types
  • various adapter plates
  • assorted reel widths

This powered winch can handle umbilicals, small flexibles, wire rope and coiled tubing.

The AQPR-06-60 powered reel winch is a medium sized tower drive system for handling umbilicals, small flexibles, wire rope and coiled tubing. The unit is fitted with horizontal cylinders to engage the drive hubs into the reel centre with pins slotting into the reel drive holes and vertical hydraulic jacks to raise and lower the drive hubs of reels at full load capacity.

Various adapter plates are available to suit different reel flange arrangements and hole centre diameters. The tower bases are bolted together and spacer beams are available to suit different reel widths.

The unit can be set to operate in manual, constant tension or render mode.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY.

ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.

Dimensions and weight

DESCRIPTION
AQPR-06-60 SETUP
AQPR-06-60 TOWERS
TYPICAL POWERPACK
CONTROL CABIN
SPARES CABIN
Length
8.34m max
1.20m
2.70m
1.50m
2.00m
Breadth
2.30m
2.30m
1.80m
1.50m
1.90m
Height
3.50m
3.10m
details without packers
2.25m
2.20m
2.25m
Weight
12Te
6Te*/tower
4.5Te
1Te
2Te

Performance

Drive torque:
  • 20Te.m at 2 rev/min
Maximum reel (+ product) weight:
  • 60Te offshore
Standard reel capacity:
  • ø 2.5 - 6.0m
  • Any reels outwith standard size may be able to be accommodated

60Te
Request more information