Dual tensioner system for the handling of flexibles, umbilicals and steel pipes

Equipment Description

BENEFITS:
  • line pull minimum of 80Te
  • variable track mode
  • modular design             

The dual tensioner system (2x50Te) can be operated in 2/4 track mode.

The two 50Te tensioners are powered by an electro-hydraulic powerpack and operated from a control cabin.

The dual unit can be set to operate automatically in pay-in, pay-out, constant tension or render mode. Speed, tension, grip and product distance are displayed on a control console. This dual tensioner system can be operated in two track or four track mode depending on the diameter of the product and required pull. In two tracked mode the vertical tracks will engage the product.

AQUATIC EQUIPMENT IS DESIGNED FOR A DAF OF 1.1 FOR LIFTING (INSHORE) ONLY.

ALL REFERENCES RELATING TO OPERATING WEIGHTS, SIZES, CAPACITIES AND OTHER PERFORMANCE MEASUREMENTS ARE PROVIDED FOR GUIDANCE ONLY AND MAY VARY DEPENDENT UPON THE EXACT SPECIFICATION OF THE MACHINE.

Dimensions and weight

DESCRIPTION
TENSIONER
CONTROL CABIN
POWERPACK
SPARES CABIN
Length
6.46m
3.50m
3.60m
3.20m
Breadth
3.41m
2.00m
2.30m
2.20m
Height
3.47m
2.20m
2.36m
2.20m
Weight
44.1Te
4Te
10Te
6Te

Performance

Line pull:
  • dual - minimum of 80Te depending on the product machine configuration
  • single - 0 - 50Te
Speed (installation):
  • 0 - 600m/hour
  • Any other configuration shall be discussed as part of specific project requirements gathering process
Speed (recovery):
  • 0 - 600m/hour
Track contact length:
  • dual - 7.0m
  • single - 3.5m
Max. track opening:
  • 750 mm
Max. track squeeze: 
  • 152Te/track
Product capacity: 
  • Ø 50 - 600mm

50Te_Dual_4-Track
Request more information